The Canon 55-250 is a unique lens

I have heard of many different reviews the Canon 55-250, and they were all so very different and yet exactly the same. Every review I read concentrates on a different function, extolling its virtues and discussing how this specific feature is the Canon 55-250, better than any other lens. A review, I have read only concentrated on the Optical Image Stabilizer technology that uses the Canon 55-250, while the other just could not stop telling me how wonderful the UD lens element is.

Although each review of the Canon 55-250 was completely different from the last, they all had one thing in common. Each of them told me that I just had to buy one of these lenses. It ya a month, I took the decision to do exactly this, so I was walking to my local stockist, came out right rear of my local stockist and buys then significantly cheaper online. I used the camera since, and I can just get enough of it.

Although all these positive reading Canon 55-250 exam was great, I could not find those describing all the benefits of this lens in plain English and simple for a point of view of users, so I decided that I'd write one myself. As I stated earlier, the Canon 55-250 uses the Optical Image Stabilizer technology. This means that the lens is capable of stabilizer himself, even when held hands, making it easier to obtain these clear action plans. It essentially means that without a lot of horrible blur, you can take photographs at hand with a fifteenth of a second shutter speed.

The Canon 55-250 lens also has a UD-glass lens element, which is designed to correct any problem of chromatic aberration can occur. This gives a fantastic image quality, throughout the focal range of the lens. Getting to the bottom for the more technical side of things, the maximum opening is f/4 to f/5.6, there are 12 elements in 10 groups and the length nearest focus is 3.6 feet. Weighing only 13.8 ounces and measuring only 4.3 inches by 2.8 inches, the Canon 55-250 is also a very light and compact lens, making it easy to carry when outside all day.

As far as telescopic zoom lenses, Canon 55-250 is certainly an outstanding example and I couldn't be happier that I have taken the decision to buy an and is strongly recommended that anyone who thinks to do, do!

Do you think that it is the ideal lens for you?

I know, that it may be difficult to choose the ideal lens for your camera. You can spend hours to research and always end up buying the wrong lens. Worse still, you could lose a lot of money and time in the end.

If you think that this is not the lens for you, then see my Canon 18-55 review for an alternative.

This will give you a fresh alternative to this review of Canon 55-250.


View the original article here

Two tricks of the trade used by photographers of the product

Photographers of experienced professional products have a wide range of tips and tricks they use every day to reach the sorting of the final results that not only look incredibly simple to reproduce, but who actually do the work to make people want to buy the product. It is often these photographs whose simple and relatively simple appearance that require the most important work, planning and preparation. It is only when you try to recreate these kinds of images yourself you start to realize that it is really much more to professional photography product that meets the eye, or even of the lens.

For example, you might need a product that you want to display the commands, like iPhone for example. With this dish on the table makes it look less real, and that you think, almost certainly correctly, that by standing products, it seems more three dimensions, most real and therefore more tangible and attractive.

But if you have already tried permanent iPhone or another thin, curved up you'll have noticed that it is very difficult. You can try something like Blu - Tac or plastecine, but you can't really there to confront directly unless you corner of the product in a ball, but of course it is then quite obvious.

In some cases, you will find that the product can even be supported by behind very well because it is transparent, mesh or very complex. The answer in many cases is to use the fishing line or cotton thread that is sold as "color matching" because it is truly transparent. By attaching a piece of it on the back of the iPhone with BluTak or by tying around a part of the product, you can have the standing product, or even inclined angle. Of course, you will also have the visible thread, which is if clever post production. By using technical complexes, it is possible to remove completely from the line, even of quite complicated and busy environments, making it look as if the product is standing all by itself, seemingly defying gravity photo editor.

But it is a major problem that must be overcome and there is much more. For example, you can assume that a bottle of shampoo is relatively easy to photograph, until you realise that the bottle is made of black plastic material and the CAP is made of a material of shiny chrome. How you light the product so that the black bottle is not as black as it seems flat and unpleasant, without high chromium shine so brilliantly is barely visible to all the? If you try to photograph such a product, it seems that you either have to accept that the bottle will be too dark or too light plug, but not both at the same time.

Some professional photographers produced may be able to create a platform of which has finely sufficiently detailed to be able to focus the light or light diffuses the light in the right way to overcome this problem, but there is another solution is possible even faster in post-production. Taking at least two photographs of the product, one overexposed so that manifested in the black bottle and an underexposed so the CAP looks like detailed, it is possible to then mix these images together twp, transfer of the cap of the image slightly darker at the most exposed one, creating a photograph which ensures that each part of the product is properly informeddetailed and attractive.

An iPhone and a bottle of shampoo are produced hardly unusual, that gives you just a taste of several thousands of tips and tricks that product photographers use everyday for us wrong by seeing the impossible.

If your company could do with the help of professional photographers product then visit the people of the Packshot for affordable advertising photographers providing photography services at low price for small and medium-sized enterprises.


View the original article here

Using layers for Photoshop masking color match

Often, we see images that have a single object in the color and the rest is in sepia tones or a single colour contrasting. For example a blue color yacht on the sea with the port in the background by clear weather can be very dynamic. Can the dynamism be mitigated? Yes, it may be. The use of Photoshop with a contrast masking or matching of colors can be applied. The final image can be the perfect composition in which the yacht is blue, which is the main purpose of the image. The rest is made of a single colour or blurred. The use of layer masks is necessary for the editing process. Retrieve the yacht with a clipping path can also do the same. To add drama to the object (yacht), it can be put in a new image. It may be sailing later in the ocean or moving around a waterfall. Of course when it comes to the memory of the client, the Visual is the requirement.

Using adjustment layers, the designer is able to use contrasting colours also. The possibilities are unlimited for several clients. For example t-shirts can be changed, colors can be changed and packs of products may be different shades, shades of the car can be changed in too. The use of the color replacement tool can be used. It is near the Brush tool in Photoshop. The colour is selected for the painting. It can also obtain the exact shade using the tool of tolerance. Re-coloring on other colors can also be done. More details can be done with this tool. With the help of the selective tool can adjust the number of colors. But they have all to do with the help of overlay. Colors can also be replaced if they are not included in the composition. The color replacement tool is effective for the same. Can isolate the area and make re-coloring only in the part of the image. With the use of fuzzy adjustment slider adjusts the pixels accordingly. If the image should always be worked on, and then saturation and the brightness can be used. There is a way to refine the set of colors. Localized color clusters can also be launched from the Toolbox.

But it should be noted that only a professional has the power to understand and use the right Photoshop tools with masking color match. An outsourcing firm uses the best designers and advanced to make these complex jobs. It is an ideal way to combine the real and digital world in pictures. They are able to use even occasionally the false mask to the sharpness of the image layer in a specific location. It is one of the most advanced of Photoshop. When deployed this advanced feature does not require a third-party plug-in. A more advanced version of the Photoshop software has the it. The advantages of hiding are great for many companies where images play a large role in providing benefits.

Atiqur Sumon
Chief Executive, DTP & SEO Expert to outsource Experts Ltd.
Clipping path. Photoshop Masking


View the original article here

Why choose a professional photographer?

Why choose a professional photographer?

Today, it seems as if everyone with a digital SLR camera can take a picture and he POPs in Facebook. What follows is a procession of family and friends added that the photographs of the person and suddenly they're photographer.

Why you would then pay a professional photographer to take pictures portrait yourself rather than relying on their camera and your friend? After all, their major watched photographs on their Facebook profile.

There are several reasons why a professional photographer is a better option.

When you commission a professional photographer, you are not only pay for the final product, the photographs. You pay for their time - and not only the time they spend with you on the day, but by the time they invested in themselves for the level that they are. You pay for their training, their equipment, their expertise and their ability to take not only an image, but make you look your best in this image. To compose and to expose correctly - not only illuminated by the Sun, but the edge light or backlight. You pay for their experience, their ability to make you feel comfortable, relax and just be yourself.

They advise you on what porter for you ensure that you look your best, and perhaps more importantly, you will tell what not to wear.

It is also true to say that a picture is taken the day of the shoot, which is not where it ends. Before a professional photographer will give you the final product, they were reviewed, sorted, edited and enhanced these photos to ensure that every detail is perfect. And I do not mean "red eyes correction" - a professional photographer would have made this error in the first place. Part of the cost you pay is payable to the photographer in post-production time, creating a product for you is not just a photo, but a timeless memory and experience.

Yes, there are probably less expensive – even free - methods of taking these pictures. But the odd adage "you get what you pay for" true rings in photography. Not everyone knows what makes a great photograph, but everyone can recognize a poor photograph.

Therefore before you asked the boyfriend of your sister to take a picture of you in the front garden of his mom, what a professional photographer may be able to offer you. And you may be surprised at the cost too!

Mike McLean is a professional photographer and owns and operates Mike Mac photography in London.
You can find more information by visiting http://www.mikemacphotography.com/


View the original article here

Tricks DSLR stabilization/Steadicam cheap or free

Then what are the options for those of us refusing or unable to low shell of even more affordable stabilization platform of range as the Steadicam Merlin or el-cheapo House those on eBay? This is all the cinéma vérité style and give each headache? In addition, fortunately, there are some ways good markets or even free for the constant fire during the production and post.

Poor man's steadicam - finding the Sweet Spot of gravity

Mobile stabilization systems use a system of checks and balances that balance the mass of the camera and allow to "float". Contrary to popular belief, it is not the gyroscope on some models that fit the shot, it is the weight. The gyroscope would be useless without them. The small mass of dSLRs allows the same principle of checks and balances be used with a lightweight tripod, without adding weight, when you're in a pinch.

Warning: If you have a heavy lens, attached monitor or anything to another heavy on the body of the camera, it will probably work. You also need a tripod relatively light, or better yet, light monopod to do the work without obtaining quickly tired during the life of the camera.

First, mount your digital SLR camera on your tripod/monopod as usual. Then, extend your index finger as if you point to someone and find the tripod/monopod, sliding the tripod up and down until it is perfectly balanced while lying on your index finger. (Security, to make this step on your bed or couch where you drop your camera.) You may need to extend the leg tripod or monopod for heavier cameras balance. Once you've balanced it, note the exact point where your finger touches the tripod/monopod. Put a few bands of gaff or something to mark if you want.

Now, adjust the tripod and the camera as if you were about to begin filming, in exactly the same place where he balanced when it was on your finger. For best results, try to keep rather light with perhaps your thumb and index and major, not your hand any. You can now walk around while shooting and even jump up and down and your shots will be remarkably shake-free. It takes some practice to maintain this level, but this method rocks once you get the freezing it.

Let your software Fix It

Way less expensive that most hardware stabilization systems are available for your video editor of third-party plug-ins. You have even these tools if you are suitable for the use of such things as the movement of the runway in After Effects, but for a quick and easy fix, nothing beats the. Popular include proDAD Mercalli with new blue stabilizer from the 99 $ to $ 200 depending on configuration (standalone or plugin). Another option is the free Deshaker for Virtualdub.

To use, simply select the plugin in your effects folder and drop the clip you want to stabilize. Each program allows you to adjust the settings and you'll have to play with each clip to get a result you like. Stabilization in post-production will usually just zoom require to eliminate a black border precarious as a result of the procedure. This will slightly degrade the image by introducing a little fuzzy, but improved smooth can be quite remarkable hardly tenable and generally a value the slight loss of resolution.

Screaming Media is a video production company in Los Angeles, focusing on the development of powerful and creative videos. We also have crews satellite projects of video production of Dallas and San Francisco video production projects. We offer high quality, attract the attention of the results which are designed to meet the specific objectives and target markets of each individual client.

Michiel Van Kets wrote articles on Brailler Media, a production company video leader, developing projects of powerful and creative video production to customers around the United States. If you need high quality, attract the attention of the results which are designed to earn the specific objectives or target of each individual client, blare media markets is certainly the place for you. Discover Los Angeles Video Production and the Production of a video of Dallas today.


View the original article here

What is depth of field in photography?

Depth of field is the distance between the nearest and most distant points of the camera and arc in acceptable focus sharp in the image. The amount of this in the image is a function of the interaction of two factors:

1. The magnification of the image (with a focal data, determined by the distance from the lens of the object).

(2 Two) the color to which the lens is set.

It may vary by changing each factor or by changing the two.

Any given lens,

1 Reducing the distance from the camera of the object-for the purpose to increase the magnification image - will reduce the depth and vice versa;

2 Increase in the size of the opening of the lens will also provide low depth and vice versa.

It is a common mistake to say that wide angle, relatively short focal length lenses, will provide a greater depth of field than a normal focal length at the opening of the lens even lens. A similar error would be to say that long-focal will give less depth than the normal to the same bicolor. This would be true only if the distance from lens to object the same, have been preserved which would result in less image with the lens magnification wide-angle and more with a telephoto lens. But it is often the practice of distance from the lens of the object when focal lens is amended to insert the object in the image as desired. Depth of field is thus not a function of focal lens in itself; It is a function, such as the perspective of the image, the use of the lens.

Whenever a lens is focused on a topic there is only one only plan, from the subject at right angles to the axis of the lens that is truly emphasis, regardless of the setting of opening. This is known as the main focus. However, narrowing of the opening of the lens also shrink the angle of acceptance for the beam of light rays that will make up the image in a point on the sensor of the camera or a film. Each point of the image is actually a small circle, called the circle of confusion at least blur. This is shown more easily when the image is of a point light source, such as a star, on a background dark. No lens could effectively implement discussion as a single light point infinitely small. If the circle of confusion at least is very low (about 1/500th of an inch for a 35 mm camera lens), the image will be called sharp. With an angle very narrow acceptance for each batch of ray, there is a measurable distance along the axis where the circle of confusion less remain the diameter or smaller, so that the projected image will appear always sharp.

Control depth is very important for the last appearance of the photograph, f-parameters are not only arbitrary. Each choice of shutter and diaphragm setting combinations will represent therefore a compromise between the needs of the action - stopping what depth is required.

There are three ways to determine if the depth of field in an image is sufficient for your object.

1. You can close the diaphragm (most single-lens reflex cameras allow for visualization of depth while some still digital single lens reflex cameras keep this function) just by observing the effect on the relevant parts of the image of frosted glass. If the image should be enlarged in printing, close the diaphragm of one or two additional parameters to allow the enlargement of the circles of confusion in the impression.

2. You can see the specific scales engraved on the frame or body of most small cameras.

3. You can refer to tables of depth of field. With a given set of circumstances (such as the size of a subject, the degree of subsequent enlargement and the desired size of the circle of confusion at least on the final image), these tables can help you get the look you want for printing.

The first two methods are usually sufficient, the use of tables is usually only necessary when you use the film photography as with digital photography, you can always change the parameter accordingly after each take.

Learn more about photography advice and the camera to take pictures. Discover the basic camera photograph for more information.


View the original article here

The evolution of marriage video

In the 1980s, a technological revolution began as the first digital cinema cameras were born. In fact they were not silver because they did not photograph the images on film 8 mm or 35 mm but rather recording images on re usable tapes. But these are very expensive, the attraction of being able to use re cassettes can be used instead of the constant expenditure of the use of film each time to make these cameras more in more popular. The most common use of these cameras was for social and family events, and so it became inevitable that they would be used for social and family, there is the largest event. And so the wedding video is born.

First of all, they have made amateur who has only mission is to about to point the camera in the direction of what was going on, but as the years went bye, more and more professionals began to engage and improve the quality. The professionals had a clear distinction of uncle Bob that is passed to a camcorder, they edited the film to give it a professional workflow and usability. They also added fancy graphics and text so that anyone watching know it was a professional production.

Finally, not content to produce a video of marriage that seemed to be better than "what uncle Bob would have" professionals have begun to use multi cameras so that they could use all the hits they would use if they were actually shooting a good movie. With the cutting of the edition of one angle to the other, the camera could stay focused on the bride and the groom and never miss the emotion of the day. Over the past ten years, the camcorder professional's got better and better. Cameras like the Sony z1 with its lens from Carl Reiss, its processor megabit 25 records in HD 1080i for a camera that produces superb images even when played on a 50 inch plasma TV. There were still questions how ever, both because it as such as cameras are, they are not very well in low light, making some difficult turn in churches. As a result of this and manufacturers understand that registration real-time such events accounted for a large share of the market, camera with a value of "ansi lumen" have been designed (better in low light). As a professional myself I have just traded in my Sony z5s Sony z1s, and I can say with a clear heart that the z5 is surprisingly low light.

Discover some of the sequences http://www.totalweddingvideos.co.uk/ and http://www.totalweddingvideos.co.uk/Page/weddingvideonewcastle.aspx. Here, you'll see samples of one and two video camera marriage turned to Newcastle.


View the original article here